Jjc RM-E6A Bedienungsanleitung PDF herunterladen

JJC RM-E6A

Infrared Remote Control Instruction

Thank you for purchasing JJC RM-E6A Infrared Remote Control. For the best performance, please

read this instruction carefully before use. RM-E6A replaces Canon RC-1 Infrared Remote

Control

z Identifying the buttons

Button for camera shutter.

Button for 2 seconds delay shutter.

z To Use RM-E6A Remote Control

1. Before using the remote, please remove the plastic separator (if your remote control has) from

the battery holder.

2. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.

3. Set your camera for delayed remote or quick response remote

4. Aim the remote control at the infrared receiver on the camera (usually within +/- 20 degree of

the lens axis, from the left to the right and from the top to the bottom) and press the

shutter-release button on the remote control (when using the remote outdoors, make sure that

the subject is not backlit and that the line of site between the transmitter and the infrared

receiver is not blocked by the lens or other obstacles).

5. How the camera focuses and shoots depends on the option selected for your camera's custom

setting. For further information, check your camera's manual.

6. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the

front end of the remote control when operating.

z Specification

For more information please read your camera instruction.

1 2

1JJC RM-E6A Infrared Remote Control Instruction Thank you for purchasing JJC RM-E6A Infrared Remote Control. For the best performance, please read

Seite 2

2• 100% compatible with CANON RC-1, RC-5 infrared remote control. • Easy-to-replace CR2025 lithium battery. • Operating temperature: 5 °C to 40

Keine Kommentare

Jjc RM-E6A Bedienungsanleitung